Parts We Supply.	Description.
Bearings.	Big Ends, Cam Bearings, Main Bearings, Small End Bearings, Thrust Washers.
	Standard & heavy duty materials.
	A bearing allows an engine component to rotate on a film of oil without seizing up.
Cam followers.	Follows the motion of the camshaft transferring it to the valves.
Camshafts.	A device which opens and closes the valves in time with the pistons.
Carburettors.	Supplies fuel and air mixture to the engine.
Core Engine Components.	Components can be supplied when the customers own component is beyond economical repair.
	Components include:- Blocks, Cranks, Heads, Rods etc.
Core Plugs.	A safety device to prevent damage to the engine in freezing conditions.
Crankshafts.	Transfers the motion of the pistons to the flywheel.
Cylinder Blocks.	Houses all the moving parts.
Cylinder Liners.	Fits into the block to restore the cylinder bore.
Fans.	Supply cooling air to the engine.
Filters.	Removes foreign bodies from the engine oil.
Gaskets.	Provides a seal between metal components.
Head Bolts.	Clamps the head to the cylinder block.
Hydraulic Lifters.	An automatic cam follower.
New Cylinder Heads.	Bolts on the top of the block whilst holding the valves to allow the gases to flow through the engine.
	Certain cylinder heads are capable of housing the camshaft train.
Oil Pumps.	Supplies a constant flow of oil to essential engine components.
Oils.	We use a wide range of high performance lubricants for every engine application from new engine ‘running in’ oil to fully synthetic racing oil.
Piston Rings.	Provide a seal between the piston & the piston bore.
Pistons.	Compress the mixture within the engine to provide the power to the crank shaft.
Plugs.	Provide the spark to ignite the incoming fuel.
Rods.	Hold the pistons to the crank.
Sumps.	Hold the oil at the bottom of the engine.
Timing Belts & Kits.	Ensures that all the rotating parts within the energy remain in synchronisation with each other.
Timing Chains & Kits.	Ensures that all the rotating parts within the energy remain in synchronisation with each other.
Valve Guides.	Made from a wide variety of materials all of which allow the valve to function consistently inside the cylinder head.
Valve Springs.	Controls the motion of the valves.
Vernier Pulleys.	A high performance device allowing the correct timing of the camshaft.
Water Pumps.	Promotes the circulation of the coolant through the engine.